Quantcast Placing Piles by Jetting

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
is set in place, a hole for a driftbolt is bored through the PLACING PILES BY JETTING cap into the top of each pile, and the driftbolts are driven. The  transverse  and  longitudinal  bracing  is  then  put  on. Jetting often makes pile-penetration easier. Jetting Sometimes,  however,  the  bracing  may  be  installed is the process of forcing water under pressure around before the piles are capped. and  under  the  pile  to  lubricate  and/or  displace  the surrounding soil, as shown in figure 8-25. In soils other Figure 8-25.—Jetting with a single jet pipe, 8-19

Construction News

Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +