5 inches (fig. 9-17) to allow water to drain away from
that windows, doors, and roll-up doors can be installed
the building. The elevation and type of interior floor are
only when erection is completed. When insulation of
not relevant as long as the finish of the interior floor is
the building is required, insulation boards (usually 4 by
8 feet) maybe of any semirigid material that can be bent
not higher than the top of the concrete cap.
to match the radius of the building. The insulation is
installed using clips, as shown in figure 9-18.
The K-SPAN building system is similar to other
When the integrity of the end-wall panels is
types of pre-engineered or prefabricated buildings in
continuous from the ground to the roof line, the end