achieve the same end results. Table 9-3 shows the
personnel and skills required to erect this building.
The main component of the K-SPAN system is the
trailer-mounted building machine (fig. 9-12). This
figure shows the main components of the trailer and
general operating instructions. The primary position of
the operators station is located at the rear of the trailer.
The crew member selected for this position must have
a thorough understanding of the machine operations and
manuals. From that position, the operator controls all
the elements required to form the panels. The operator
must remain at the controls at all times. From the
placement of the trailer on site to the completion of the
curved panel, attention to detail is paramount as with all
aspects of construction.
As you operate the machine, you will be adjusting
the various machine-operating components.
Adjustments for the thickness, the radius, and the
curving machine MUST be made according to the
Figure 9-11.Chart for determining crew size for ABM 120.