• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Types and Uses - Continued - 14256_248
Chapter 42 Bars

Tools And Their Uses - Hand tools and what they are used for
Page Navigation
  211    212    213    214    215  216  217    218    219    220    221  
TM 9-243 USING A SLIDE HAMMER PULLER SET 1   Check to make sure that you have all parts before starting the process. Make sure the threads are clean and will move freely. 2    Lock the jaws (1) on the gear with the locking fea- ture and slide the hammer handle (2) up the shaft in the direction of the pull. WARNING DO NOT SLIDE THE HANDLE TOO RAPIDLY.  THE  GEAR  MAY  FLY  OFF AND  CAUSE  INJURY. 3 Slide the handle in a series of slides until the gear is loose or comes off. CARE  OF  PULLERS 1 2 3 4 Keep pullers clean at all times. Do not grease or oil the gripping edges. This will cause the tool to slip. Clean all the tools after use and store so the threads will not become damaged. Make certain that attachments and adapters are stored with the basic puller and that they do not become separated. 5   Oil pullers after use and wipe clean before using again. 6   When  storing  for  long  periods,  apply  a  coat  of  rust- preventive  compound  on  the  tools  and  store  them  in a dry place. 41-5/(41-6 blank)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.