USING THE BLOCK
1 Secure one end of the rope or ropes to the load (1)
to be moved.
Pass the other end of the rope over the pulley (2) of
the block attached to some type of solid support.
Apply the necessary manpower to the end of the
rope to lift the load.
USING THE CABLE JAW GRIP AND TENSION PULLER
Place end of cable (1) between jaws (2) of cable jaw
grip (3) (from jaw end of tool).
Hold the jaws (2) together over cable (1). Apply
pressure with tension puller handle (6).
Apply pressure until cable (1) is stretched to make
the jaws (2) hold the cable firmly.
Continue pressure using handle of tension puller (6)
until desired pressure is reached.
Fasten eye (4) to tension puller hook (5).