Immediately after accepting the
operational responsibility for a boiler,
you should make a complete
inspection of all auxiliary equipment.
Which of the following tasks should
you complete before lining up a
1. Remove excess water from the gas
2. Check for fuel leaks
3. Measure the amount of fuel oil
with a stick or gauge
4. Check the fuel oil pressure
Which of the following tasks is NOT
performed when lining up a gas-fired
1. Open the main gas cock
2. Check the draft devices
3. Purge air out of the gas lines by
4. Close the control valves and safety
2-53. Before a boiler is lighted off, which of
the following valves must be opened?
Feedwater stop and check
3. Burner fuel
4. Main steam stop
You are filling a newly repaired boiler
with treated water and the temperature
of the pressure parts is 40°F. What is
the maximum allowable temperature
for the fill water?
You have just fired off a newly
repaired boiler. The temperature
should be raised what number of
degrees per hour until operating
pressure is reached?
Before cutting in the boiler, you
should open all drain lines between the
boiler and the header.