5-11. Which   of   the   following   tools   is designed   for   digging   and   cutting operations? 1. A  mattock 2. A peavy 3. A  timber  wedge 4. A   block   plane 5-12. The   single-beveled   mattock   can   be combined   with   other   digging   tools to   perform   a   variety   of   functions. The   "pick   mattock"   is   a   combination of   the   single-beveled   mattock   and what   other   tool? 1. A  shovel 2. A   screwdriver 3. A   pick 4. A  hammer 5-13. The  raw  wood  handles  of  mattocks should   be   rubbed   thoroughly (preferably   prior   to   use)   with   a cloth   soaked   in   which   of   the following   liquids? 1. Water 2. Gasoline 3. Alcohol 4.   Linseed   oil 5-14. On   a   compass-style   circle   gasket cutter,   what   is   used   to   adjust   the diameter? 1. A hammer 2. A  knurled  thumb  screw 3. A   straight   slot   screwdriver 4. A   round   split   adjustable   die 5-15. A   bit   brace   circle   gasket   cutter can  be  adjusted  to  what  maximum diameter? 1. 1    1/4   inches 2. 2   1/8   inches 3. 5   1/2   inches 4. 9   3/4   inches 5-16. What   is   used   to   adjust   the   diameter of   a   bit   brace   circle   gasket cutter? 1. A hex wrench 2. A   straight   slot   screwdriver 3. An open-end wrench 4. A   machinist's   level 5-17. A   hollow   gasket   cutter   is   also referred   to   by   which   of   the following   terms? 1. A  solid  punch 2. A square punch 3. A  hard  punch 4. A  hollow  punch 5-18. Which   of   the   following   types   of gasket   cutters   has   a   tapered   square shank? 1. A   compass-style   circle   gasket cutter 2. A   bit   brace   circle   gasket cutter 3. A  heavy  duty  bench  mount  gasket cutter 4. A   hollow   gasket   cutter 5-19. Which   of   the   following   tools   is used  by  emergency  personnel  to  gain quick  access  to  an  area? 1. An  adz 2. A  timber  wedge 3. A  crash  ax 4. A nested saw 5-20. Which   of   the   following   tools   is used  for  chopping  and  smoothing lumber   or   logs   where   a   great   deal of  wood  or  bark  is  to  be  removed? 1. An adz 2. A  timber  wedge 3. A    half-hatchet 4. A   woodworker's   chisel 5-21. Timber  wedges  are  normally  made from   what   material? 1. Plastic 2. Copper 3. Glass 4. Steel 5-22. What   are   the   two   categories   of handsaws? 1. Crosscut  and  nested 2. Keyhole and hacksaw 3. Ripsaw  and  crosscut 4. Drag and push 26