5-23. In   reference   to   handsaws,   which   of the   following   statements   is/are true? 1. Crosscut   saws   are   designed   to cut   against   the   grain 2. Ripsaws   are   designed   to   cut with   the   grain 3. Both  1  and  2  above 4. Crosscut   saws   consist   of   a thick   blade   with   a   steel   handle 5-24. Which   of   the   following   saws   should you  use  to  cut  down  a  tree? 1. A  backsaw 2. A  one-man  crosscut  saw 3. A  keyhole  saw 4. A  nested  saw 5-25. When   two   men   are   required   for   extra heavy   cutting   jobs,   which   of   the following   saws   should   be   used? 1. A  two-man  crosscut  saw 2. A  backsaw 3. A  nested  saw 4. A compass saw 5-26. What   is   the   smallest   type   of   nested saw? 1. The  backsaw 2. The  keyhole  saw 3. The handsaw 4. The  hacksaw 5-27. What  types  of  blades  are  used  on hacksaws? 1. Flexible   and   soft 2. Hard   and   rigid 3. Rigid   and   soft 4. Hard   and   flexible 5-28. Which   of   the   following   saws   is designed   to   cut   metal? 1. A hacksaw 2. A   handsaw 3. A  one-man  crosscut  saw 4. A  two-man  crosscut  saw 5-29. Which   of   the   following   tools   is/are used   for   cutting   underbrush, shrubs,   tree   branches,   vines,   and tall   grass? 1. A nested saw 2. A  brush  hook 3. A machete 4. Both  2  and   3   above 5-30. The   machete   used   in   the   military   is normally   what   size? 1. 10   inches 2. 15   inches 3. 18   inches 4. 30    inches 5-31. For   lifting   or   moving   heavy   objects such   as   logs   or   timbers,   you   should use   which   of   the   following   tools? 1. A  mattock 2. A   timber   carrier 3. A peavy 4. Either   2   or   3   above 5-32. Which   of   the   following   tools   are used   for   climbing   poles   and   trees? 1. Safety   straps 2. Safety    belts 3. Leg   irons   with   spurs 4. All   of   the   above 5-33. What   are   the   two   types   of   planes most   generally   used? 1. Block   and   tackle 2. Block  and  bench 3. Bench   and   circular 4. Square  and  round 5-34. What   is   the   smallest   type   of   plane? 1.   Block 2. Tackle 3. Bench 4. Square 5-35. The   cutting   blade   on   a   jack   plane is   set   at   approximately   what   angle? 1. 15   degrees 2. 25   degrees 3. 45   degrees 4. 90   degrees 27