TM 9-243
USING SCREWDRIVERS - Continued
USING AN OFFSET RATCHET
SCREWDRIVER
1 Select the correct size tip for the screw head.
Pull the lever to the right or left, for installation or
removal of the screw. This allows the screw to be
driven without having to remove the tip from the
screw head.
USING A SPIRAL RATCHET
SCREWDRIVER
NOTE
These screwdrivers come in several
styles. Some have the different size bits
stored in the handle.
3 Set selector lever (3) as shown.
4 Insert the tip in the screw slot. Hold the screwdriver
blade as shown. Move handle (4) back and forth to
install or remove a screw.
1 Select the correct size tip for the screw head being
used.
2 Install tip (1) in screwdriver by pulling back on metal
shell (2). When tip is seated, release the shell to lock
it into place.
22-7
