TM 9-243
USING A BENCH GRINDER - Continued
NOTE
Since user must use both hands to hold
tool to the wheel, another person is
required to turn the handcrank in a coun-
terclockwise direction.
3
Position grinder where it will be used and tighten the
mounting clamp (1) to hold securely on the bench.
6
Rotate the handcrank and move the tool forward
until it makes contact with the wheel.
1
Loosen the wing nut (2) on the rest (3). Adjust the
rest (3). Tighten the wing nut (2).
2
Support the tool to be ground on the rest (3).
7
Move the tool back and forth across the abrasive
wheel face to be sure of an evenly ground surface.
29-4
