Using a Rivet Buster Chisel

Using a Machinist's Cold Chisel

Chapter 27 Punches

Tools And Their Uses - Hand tools and what they are used for
Page Navigation
146

TM 9-243 USING A RIVET BUSTER CHISEL WARNING WEAR EYE PROTECTION. The following procedures are designed for using a rivet buster chisel. 1 Place cutting edge (1) of the chisel firmly against the rivet shaft (2) between the head and the metal. 2 Grip the chisel firmly and strike chisel head (3) with a machinist’s or sledge hammer. (4). 3 Continue striking chisel head until rivet head has been cut off. CARE OF CHISELS 1. Protect the cutting edges by installing protective 3. Lubricate with a light coat of oil before storing. covers. 4. Regrind broken or chipped edges before using. 2. Store in racks or where they may not be chipped or broken. 26-5/(26-6 blank)

Privacy Statement
Press Release
Contact