TM 9-243
WARNING
DO NOT USE STANDARD SOCKETS
WITH ANY IMPACT TOOL. THEY CAN
SHATTER CAUSING SERIOUS INJURY
AND/OR DAMAGE TO THE
EQUIPMENT.
8
Select the proper attachment (4) and secure it in
place on the driving anvil.
USING THE IMPACT WRENCH
WARNING
BEFORE USING ANY ELECTRICAL
TOOL, ALWAYS MAKE CERTAIN THE
TOOL IS EQUIPPED WITH PROPER
GROUNDING FEATURES. FAILURE TO
HAVE PROPER GROUNDING CAN
RESULT IN SERIOUS SHOCK.
4
Start the wrench again making sure the driving anvil
is now rotating in the opposite direction.
5
Repeat steps 2 through 4 several times to make
sure the wrench is reversing consistently.
6
Disconnect impact wrench from power source.
7
Replace the wrench if it does not perform in the
above manner.
WARNING
ALWAYS WEAR PROPER EYE PRO-
TECTION WHEN WORKING WHERE
FLYING PARTICLES CAN CAUSE EYE
INJURY.
Before start of work make sure impact wrench and its
reversible features are functioning properly in the fol-
lowing manner:
1
Connect cord to power source.
2
Depress trigger (1) and note the rotating direction of
the driving anvil (2).
3
Stop the wrench and adjust the ratchet switch (3) to
reverse the direction.
52-7
