TM 9-243
USING THE PORTABLE ELECTRIC CIRCULAR SAW - Continued
Select the proper saw blade for the task and attach as
follows:
1
Make sure power to saw is disconnected.
2
To change saw blades, lock the old blade (1) on the
saw by inserting a punch, screwdriver, nail, etc, in
blade hole (2) provided.
3
Remove the old blade by removing the saw clamp
screw and flange (3) using wrench (4) provided.
Turn the wrench counterclockwise to loosen blade.
6
Set the saw’s guides (7) to the correct angle and
depth of the cut required.
7
Make sure the work (8) to be cut is firmly secured to
prevent slippage or movement.
8
With a marking instrument (9) such as a pencil, pen,
scribe, etc., draw a straight line (10) across the work
surface to act as a guide for the saw blade to follow.
4
Install new saw blade (5) on saw, and make sure
teeth (6) are in the correct cutting direction
(upwards toward saw).
5
Tighten clamp and flange screw by turning wrench
clockwise.
52-9
