TM 9-243
USING THE KEYHOLE SAW
WARNING
WEAR PROPER EYE PROTECTION TO
AVOID FLYING WOOD CHIPS OR
DEBRIS.
1
To make an inside-out cut, first drill a hole (1) large
enough to admit the point of the saw.
2
Insert the saw blade (2) and start to cut slowly, with
a minimum of pressure.
3
Be careful not to twist the blade too sharply, as the
narrow blade will easily bend.
USING THE HACKSAW
WARNING
WEAR PROTECTIVE EYEWEAR TO
AVOID FLYING METAL CHIPS.
1
Insert the correct blade (1) in the hacksaw frame (2)
and adjust wing nut (3) for proper tension.
46-6
