TM 9-243
USING THE SURFACE, DEPTH, AND HEIGHT GAGES
Below are examples of how each of the gages men-
tioned in this chapter can be used.
USING A SURFACE GAGE
Setting gage for transfer of 4-inch vertical measure-
ment.
USING A RULE DEPTH GAGE
Measuring the distance from a surface to a recessed
point.
USING A MICROMETER DEPTH GAGE
Measuring projection depth with micrometer precision.
USING A VERNIER DEPTH GAGE
Measuring hole depth of die from a given surface.
USING A DIAL DEPTH GAGE
Measuring depths of holes, recesses, slots, scratches,
and paint thicknesses.
USING A HEIGHT GAGE
Measuring vertical distance from a plane surface.
14-4
Change 1
