3-70.
What is the required minimum
equipment needed to cut glass
efficiently?
1.
A glass cutter and straightedge
only
2.
A glass cutter and tape measure
only
3.
A glass cutter, straightedge,
flat solid table, and tape
measure
4.
A glass cutter, straightedge,
and a honing stone
3-71.
When scoring glass, you should use
what minimum number of strokes?
1.
One
2.
Two
3.
Three
4.
Four
3-72.
Which of the following types of
sash should be primed before
glazing?
1.
Old and new metal sash only
2.
Old and new wood sash only
3.
Both 1 and 2 above
3-73.
What is the primary purpose of
putty used in glazing?
1.
To make a weathertight joint
2.
To hold the glass in the sash
3.
To improve the appearance
4.
To reduce glass expansion
3-74.
When you are mounting wire glass in
a small wooden window frame, what
should be the first step?
1.
Insert the glass into the
window frame with the wire
twist in the vertical position
2.
Lay a continuous l/6-in.-thick
bed of putty in the putty run
3.
Insert the glass into the
window frame with the concave
side facing out
4.
Lay a continuous bead of putty
against the perimeter of the
glass
3-75.
To clean glass after glazing or
painting, what material should you
use?
1.
Ammonia
2.
Mineral spirits
3.
Caustic soap
4.
Acid solution
1 8
